fire protection system design

Fire Protection System Design Steps

Posted on

Running a successful business requires an individual to put efforts on its safety from all aspects. This includes even those emergencies which are unforeseen like fires. Talking about fire protection system we will start off by designing it in which our basic goal should be to secure people, protect property and reduce recover time. Let us have a look at some the few steps that will help us in achieving our plans in the best way possible.

  • Step 1: Accomplish conformity with the codes
  • What’s the first criterion that comes to your mind when designing a fire protection system? It should be in compliance with the codes. In this part the tricky bit is the word “codes” by this we mean that you are following a bare minimum criteria in any emergency situation. Fire and safety codes and standards vary from place to place so it’s important to have knowledge about your area's fire and safety codes before proceeding any further in fire protection system design.

  • Step 2: Detection solution
  • The fire protection system must be able to provide you with the detection capabilities and modern technology is not only making it possible but improving it day by day which has proven to save many lives in the fire safety situations. Putting resources into a heat detector fit for triggering an alert before smoke will give a much more significant level of protection.

  • Step 3: Alarms and Notifications
  • One of the most important steps in fire protection system design is its capability to notify any fire and safety situation to the emergency responders which includes both the location and severity of fire which becomes extremely helpful in dispatching the required equipment where it’s needed the most. Fire safety is also enhanced by alarms which warns the individuals inside the building and plays a recorded message with instruction to leave the building the safest way possible.

  • Step 4: Fire suppression
  • At the point when the fire alarm system is set off, it draws in a suppression system intended to basically contain a fire until it tends to be smothered. A sprinkler system is the most widely recognized type of suppression. This proves very beneficial in fire and safety situation and gives emergency responders precious time that will again help in fire safety.

  • Step 5: Regular maintenance
  • No fire protection system will work with its maximum efficiency if it isn’t maintained on regular basis. It’s important for fire protection system design to work so yearly maintenance is necessary in this situation.

Open chat